Main Controller, Handpiece, Handpiece Table Rest, Drill Bit Set, Foot Pedal
JD500 is an ideal filing tool set for nail decoration. It has forward and reverse dual direction-rotations for left- or right-handed nail technicians. The quiet & smooth operation handpiece with a flexible extension from 500 to 20000 rpm adjustable speed is convenient to use for finishing the nails.
How to Use
1.Insert the handpiece flex plug into the power output socket on the main control machine.
2.Loose the chuck by left-turning the middle part on the handpiece and insert/change the drill bit and tighten the chuck by right-turning the middle part on the hand-piece.
3.Plug the controller into appropriate power source.
4.Choose the mode"FORWARD” or"REVERSE” direction and then switch to"On ” position to start the machine.
5.Select the speed level that you need by sliding the speed control handle. Precautions:
1.Please use the correct power source voltage shown on the controller front panel.
2.Please start to use after the collet is well fixed.
3.Please stop the machine once any abnormal movement/noise is noticed at work.
4.Please adjust the speed gradually, not abruptly.
5.Please do not touch any rotating part while the machine is working.
7.Please stop the machine firstly if want to change the direction.
8.Please do not place a cloth or anything else on the ventilation slides of the controller and keep the dust away.
9.If the cable were broken, it must be replaced by the manufacturer or service department or other technicians to avoid the danger.